[IC]:SI4463
[Frecuencia]:425~525MHz
[Energía]:20dBm
[Distancia]:1.8km
[Interfaz]:SPI
[Peso]:3.2±0.1g
[Introducción]:E10-433MD-TH se basa en el RF SI4463 original importado de Silicon Labs en EE. UU. El módulo presenta un rendimiento estable, una larga distancia de transmisión y una gran capacidad de penetración y difracción.
Consejos: este producto se ha retirado de los estantes y se puede iniciar la producción en masa.
Pin No | Pin item | Pin direction | Pin application |
---|---|---|---|
1 | GND | - | Ground |
2 | SDN | - | The module working enable control the pin, it's low level when working (See SI4463 manual for more details) |
3 | GPIO3 | Output | Connect to the transmitter of the internal module RF switch ,also cannot be connected,intelligent controlled by SI4463 |
4 | GPIO2 | Output | Connect to the receiving of the internal module RF switch,also cannot be connected, intelligent controlled by SI4463 |
5 | nSEL | Input | SPI chip select |
6 | MOSI | Input | SPI master output slave input |
7 | MISO | Output | SPI master input slave output |
8 | SCK | Input | SPI chip select |
9 | IRQ | Output | Interrupt request |
10 | GPIO1 | Output | Output pin |
11 | GPIO0 | Output | Output pin |
12 | VCC | - | Power supply 1.8V ~ 3.6VDC |