[IC]:SX1212
[frecuencia]:425~440.5MHz
[poder]:13dBm
[distancia]:0.8km
[La interfaz]:UART
[peso]:6.6±0.1g
[Introducción]:E33-433T13D está integrado en un microcontrolador de alta velocidad de baja potencia y un chip de alto rendimiento SX1212. La potencia de transmisión es de 20mW, y sólo 3,0ma se consume en el estado receptor. Tiene una función de despertador inalámbrico de un solo punto (sólo se especifica el objeto en vigilia, y todos los receptores no necesitan salir del modo de suspensión). Un solo punto de desperes un indicador muy importante, que puede ahorrar mucho en el consumo de energía del sistema.
Pin No. | Pin Item | Pin Direction | Pin Application |
---|---|---|---|
1 | M0 | Input(weak pull-up) | Work with M1 & decide the four operating modes. Floating is not allowed, can be ground. |
2 | M1 | Input(weak pull-up) | Work with M0 & decide the four operating modes. Floating is not allowed, can be ground. |
3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input |
4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU, PC) input pin. Can be configured as open-drain or push-pull output |
5 | AUX | Output | To wake up the external MCU, during the procedure of self-check initialization, the pinoutputs low level. Can be configured as open-drain output or push-pull output (floatingis allowed). |
6 | VCC | Input | Power supply 2.3V-5.5V DC |
7 | GND | Input | Ground |
8 | Fixing hole | - | Fixing hole |
9 | Fixing hole | - | Fixing hole |
10 | Fixing hole | - | Fixing hole |