[Frecuencia de carga]:410~441MHHz
[Poder de transmision]:30dBm
[Distancia de comunicación]:10km
[Tarifa aérea]:0.5~470kbps
[Tamaño del producto]:40.5*25.0*3.9mm
[peso]:5.1g±0.1g
[Introducción]:El producto E610-433TXXS es un módulo de transmisión de datos inalámbrico tipo 433M de transmisión continua de alta velocidad desarrollado por EBYTE, con microcontrolador de alto rendimiento incorporado y chip transceptor inalámbrico. Opera en la banda de frecuencia de 410-441MHz (433MHz por defecto) y tiene una potencia de transmisión de 20-30dBm.
| No. | Name | Direction | Usage |
| 1 | GND | - | Module ground |
| 2 | VCC | - | Positive reference for module power supply, voltage range: 3.0 to 3.6 V DC |
| 3 | AUX | Output | Used to indicate module operating status; user wakes up external MCU and outputs low during power-up self-test initialization; (can be left hanging) |
| 4 | TXD | Output | TTL serial output, connected to the external RXD input pin |
| 5 | RXD | Input | TTL serial output, connected to the external RXD input pin |
| 6 | M1 | Input (very weak pull-u | In conjunction with M0, determines the 4 modes of operation of the module (not suspended, grounded if not in use) |
| 7 | M0 | Input (very weak pull-u | In conjunction with M1, determines the 4 modes of operation of the module (not overhead, grounded if not in use) |
| 11 | ANT | Output | Antenna interface (high frequency signal output, 50 Ohm characteristic impedance |
| 12 | GND | - | Fixed ground |
| 13 | GND | - | Fixed ground |
| 14 | GND | - | Fixed ground |
| 18 | NC | - | NC pin, this pin needs to be overhung |
| 19 | NC | - | NC pin, this pin needs to be overhung |
| 20 | NC | - | NC pin, this pin needs to be overhung |
| 21 | REST | Input | Module reset pin, low level reset |
| 22 | NC | - | NC pin, this pin needs to be overhung |
| 23 | NC | - | NC pin, this pin needs to be overhung |
| 24 | NC | - | NC pin, this pin needs to be overhung |