[Interface de comunicación]:UART
[Poder de transmision]:30dBm
[Distancia de comunicación]:5.6km
[Método de modulación]:GMSK/4FSK
[peso]:4.8±0.1g
[Introducción]:RD400D es un módulo de transmisión de datos (radio) transceptor-transmisor de frecuencia fija integrado montado en una mesa, que funciona en la banda de frecuencia de 410 MHz ~ 470 MHz, centrándose en topografía y cartografía, agricultura de precisión, drones e Internet de las cosas. El entorno de aplicación tiene la características de peso ligero, tamaño pequeño, bajo consumo de energía y rendimiento de recepción superior. Admite una variedad de selección de engranajes de potencia, conmutación libre de velocidad en baudios del aire, selección rica de velocidad en baudios del puerto serie y fácil operación.
Soporte para TRIMTALK, TRIMMARK3, TRANSEOT (O PCC O PROTOCOLO TRANSPARENTE).
Pin serial number | Pin name | Inputoutput | Pin usage |
1 | GND | Inputoutput | Power ground |
2 | RSSI | output | Analog voltage output, indicating received signal strength, voltage output range: 0.5V-2.5V = The higher the voltage, the stronger the signal reception. |
3-6 | NC | input | Dangling (for internal testing use) |
7-9 | NC | NC | |
10-13 | IO | Input output | obligate |
14-16 | NC | NC | |
17 | GND | Input output | Power ground |
18-19 | NC | NC | |
20-24 | IO | obligate | obligate |
25-26 | GND | Inputoutput | Power ground |
27 | NC | NC | |
28 | RXD | input | Serial port receiving interface |
29 | TXD | output | Serial port send interface |
30-36 | NC | NC | |
37-38 | NC | input | obligate |
39-41 | GND | Inputoutput | Power ground |
42-44 | NC | NC | |
45 | RST | input | Module reset pin: active low |
46 | CONFIG | input | Module parameter configuration mode control pin, low level into parameter configuration mode, High level exits parameter configuration mode |
47-61 | NC | NC | |
62-64 | VCC | input | Power input pin (3.3-3.6V): the use of the need to 62, 63: 64 pin all connected. |
65-67 | GND | Inputoutput | Power ground |
68-77 | NC | NC | |
78-80 | GND | Inputoutput | Power ground |